Several reasons lead a player to change or replace the rubber on a ping-pong racket. First, it could be worn. The coating on the table tennis racket will begin to wear out inside the progression of time and the racket won’t proceed just as it did when it began.
Then you will notice that the bounce is not like it started or that the sponge layer is no longer firm. In these conditions, it is simply necessary to replace the rubber of the racket.
Another reason for replacing rubber could be its degradation.The more the racket is utilized, the more the pips in the elastic layer will droop and a change should be made.
Furthermore, after some time, the elastic layer can weaken, and consequently, it is important to supplant it before it totally falls off the racket.
Likewise, it is feasible to supplant an elastic layer to further develop it. For a ping pong player, the appearance of the rubber and sponge play an important role in the hitting power of the ball and achieving spin with the paddle.
Thus, a high-performance rubber layer will provide better performance on a playing field. Replacing would only be a good option.
In addition, you can simply change the rubber when you have a new table tennis blade. Let’s discuss how to replace the table tennis rubber?
At whatever point you need to change the rubber of the table tennis racket; you should remember that there are 2 sorts of rubbers that are utilizing for table tennis paddles.
- The first one is the steady rubber that implies it can’t be changed. for this, you should need to purchase a new one.
- 2nd one is the transitory rubber that can be changed effectively utilizing various systems.
The most effective method to accurately and expertly select, replace this and glue the elastic of the table tennis elastic sleeve.
How to correctly and professionally select, replace, and paste the rubber of the table tennis rubber sleeve:
1. Brush the glue for the rubber of the table tennis rubber:
Glue the inorganic paste on the wipe layer, the suggested sum is RMB 1 yuan, not all that much, (if the racket has a lot of remaining glue previously, you can clear it off first) utilize the unique wipe for inorganic paste to spread uniformly.
2. Brush the glue for the table tennis bottom plate.
Then, connect the inorganic paste about the size of 1 yuan to the base plate, and utilize the inorganic paste wipe brush to extend it equitably.
players must remember to not peel off the rubber forcibly, which may cause the table tennis bottom plate Wire drawing or the sponge to break, then the gain is not worth the loss. The correct way is: slowly tear apart from the diagonal line (against the bottom line).
3. Remove the glue:
if adhesive remains placed on the table tennis baseplate.
You may use one part of the rubber as a tool to remove the polymeric glue.
However, if there is old glue remaining on the sponge itself, the sponge will not be flat enough and it is not easy to remove the glue.
4. Tools Prepare:
to put the things we will use in front of our eyes, where we can reach them, the table tennis bottom plate, two pieces of new rubber, inorganic glue, inorganic glue sponge brush, small clamps (sponge clips), sharp cutting knives, and cutting boards.
Everything is ready, let’s start pasting table tennis rubber!
when stretching, go up and down, and then stretch to the left and right in turn.
5. Waiting time:
Athletes should be careful to wait until the glue dries in normal surroundings. the glue takes ten minutes to become dry and clear. In case, you have a moist or damped room it takes a long time to be dried.
How often is a table tennis racket rubber replaced?
There is no specific frequency for replacing the rubber layer of a table tennis paddle. The frequency of play and the way the player uses their racket can influence how often the rubber coating of a racket changes.
It is also important to mention that bad weather and climatic conditions can affect the life of the rubber layers.
In reality, each player will be able to make the substitution as soon as it is necessary. Some players go so far as to do it two or three times a year depending on their training frequency and their style of play.
The conditions for changing the elastic:
For the substitution of the elastic layer of a table tennis paddle, it is important to have certain components available to it.
- First, you ought to have the new elastic covering. Then, at that point, you need a wiping implement which is sold with a suitable paste for holding.
- You will likewise require some scissors or a blade adequately sharp to eliminate the current elastic layer.
Removal of the old rubber layer.
To remove the rubber layer you need to change, do it slowly and slowly enough to avoid damaging the racket. First of all, make sure to gently detach the rubber layer completely and slowly. After removal, all residues and debris on the blade should be removed so that it is smooth and ready for a new layer of rubber. For smoothing, you can use flexible sandpaper.
When do you have to replace the table tennis elastic?
substitution of the elastic depends upon what amount of time you require for rehearsing every day. for example the additional time you take for rehearsing table tennis, the more quickly your table tennis elastic will be exhausted and the other way around.
However, you are utilizing or not the table tennis elastic it will harm over a long time. Also, flimsy elastic won’t be reasonable for playing table tennis.
The following is the substitution cycle for the table tennis elastic:
- You should need to supplant the table tennis elastic inside three to four months on the off chance that you practice the table tennis match-up every day nearly for three to four hours.
- You should need to supplant the table tennis elastic inside a few months in the event that you practice the table tennis match-up day by day nearly for a few hours.
- You should need to supplant the table tennis elastic inside three to four months in the event that you practice the table tennis match-up every day nearly for one to two hours.